top of page
Black and Red Left Arrow
Instanta CH1000

Providing a constant supply of filtered hot or cold water.  This stylish auto fill model will provide all the beverage requirements for a busy office.​



  • Fresh, clean tasting water with the in-line filter, which also helps reduce lime scale

  • Easy to use non-drip taps

  • Unique service warning codes

  • Long life incoloy element with and a boil dry protection system.

  • Over 60 cups per hour chilled water below 11°c (depending on ambient room temperature)

  • Thermistor controlled for constant hot water temperature 97 °c

  • Quality stainless case & insulated boiler

  • Compact, reliable & long-lasting

  • Low-voltage switching on all controls

  • Easy installation & maintenance

  • Choice of overflow at front or rear

  • Two safety cut outs

  • Supplied with a 2 metre food quality hose with ¾" BSP female connections and an 13 amp moulded plug

  • Manufacturers 1 year parts & labour warranty

Plumbing - Designed for direct connection to a potable (drinking water) cold water supply using the 1.5 metre ( ¾" BSP)  hose supplied, with a minimum pressure of two bar.  An isolating valve should be installed between the supply and the heater.  Rear supply connection and choice of rear or front overflow (rear option requires kit, not supplied).

Electrical - To be connected to a 230 volt supply with a suitable break capacity of 13 amps.

Instanta CH1000

Combined Water Boiler & Chiller


Heat up time

Rapid draw off

Hourly output

3 KW

12 mins

3 litres

20 cups

28 litres

168 cups




579 mm

270 mm

503 mm

Tap clearance to drip tray

148 mm

Tap clearance to drip tray

45 mm

bottom of page